Loading product information...
Loading product information...
High-power 6.5kW 48V inverter with massive 7800W PV input, 550VDC MPPT stage, 4-unit parallel capability, and smart load management.
The Crown Micro Arceus 6.5KW (Model: ARCEUS 6.5) represents the performance flagship of the Arceus series, engineered for expansive residences, light industrial factories, and commercial establishments with heavy energy demands. Delivering 6500W continuous pure sine wave power at unity power factor (PF 1.0), it handles motor inrush currents with a 13,000VA peak surge capacity. The unit features a high-capacity 7800W MPPT solar input stage with an extended 550VDC maximum open-circuit voltage rating and a 27A input current limit. This allows engineering teams to maximize rooftop solar arrays with modern high-power bifacial modules, charging 48V battery banks at up to 120A while supplying household loads.
Zener Authenticity Promise: All sitemarks, models, and technical statistics are registered with the factory and verified in our physical laboratory before sale.
Take advantage of the 550VDC VOC limit by connecting twelve to fourteen 550W panels in a single series string to minimize cabling loss and maximize inverter efficiency.
Ensure battery leads are rated for at least 150A continuous current using 50mm² flexible copper welding cables to prevent heat build-up.
When setting up parallel operation, confirm all inverters run the exact same firmware revision to avoid synchronization errors.
Configure the secondary AC output to drop offline when battery capacity drops below 30% to reserve power for critical loads.
Yes, the Arceus 6.5KW delivers 6500W continuous output, enabling it to run two 1.5-ton inverter air conditioners simultaneously with headroom for lighting, fans, and a refrigerator.
You can connect up to 7800W of solar panels, which equates to fourteen 550W monocrystalline modules wired in series.
Yes, the Arceus 6.5KW supports parallel operation of up to 4 units to supply up to 26kW in single-phase or three-phase configurations.
The maximum open-circuit voltage (Voc) is 550VDC, with an active MPPT operating range between 90VDC and 550VDC.
Yes, the unit includes integrated CAN and RS485 communication ports for plug-and-play closed-loop integration with popular LiFePO4 battery BMS systems.
Only signed-in customers can write reviews. Your review will appear on your profile after moderation.