Knox Krypton Eco 5000 4.2kW 24V Hybrid Inverter Dual Output Grid-Feed

Product Overview

The Knox Krypton Eco 5000 (Model: 4kW-24-pV5000-TWIN) is an on-grid and off-grid hybrid solar inverter engineered for residential and commercial environments facing high utility tariffs and frequent grid instability. Operating on a 24VDC battery architecture, the unit delivers up to 4,200W of combined PV and battery power to domestic loads while supporting grid-export capabilities up to 4.2kW. Its integrated topology eliminates the strict requirement for an energy storage bank, enabling direct batteryless operation where daytime solar directly powers connected AC loads and exports surplus generation back to the utility grid. Designed to address demanding power conditions, the unit integrates a wide 30VDC to 450VDC MPPT charge controller that accepts up to 5,000W of solar panel input. This wide voltage window allows solar arrays to wake up earlier at dawn and generate power later into dusk. An intelligent dual AC output system automatically isolates non-essential appliances during power outages, reserving stored battery capacity solely for essential branch circuits like lights, networking equipment, and refrigeration. ## Key Engineering Advantages: - Dual AC Load Management: Features primary and secondary AC output terminals to divide heavy appliances (such as water pumps or air conditioners) from sensitive baseline loads, shedding non-critical circuits instantly upon grid failure. - Battery-Independent Topography: Operates purely on solar PV and grid power without connected batteries, lowering upfront system setup costs while retaining energy independence. - High-Efficiency Pure Sine Wave Inversion: Delivers clean 230VAC power with 93% peak efficiency, preventing harmonic noise, excess heat buildup, and electrical wear on inductive motor loads. - Environmental Hardening: Ships standard with a factory-integrated anti-dust kit and conformal coating to protect sensitive power MOSFETs and logic circuits from dust accumulation and ambient humidity. ## Compatibility & Application: - Battery Chemistry Support: Fully compatible with 24V sealed lead-acid, tubular, AGM, Gel, and LiFePO4 lithium batteries. Includes a dedicated RS485/CAN communication port for direct BMS handshakes and programmable battery equalization up to 32VDC. - Solar PV Array Integration: Compatible with all high-wattage monocrystalline and bifacial solar modules up to 500VDC maximum open-circuit voltage (Voc) and 18A operating current. - Appliance Handling: Rated to run domestic loads including 1.5-ton inverter air conditioners, refrigerators, water pumps, computer workstations, LED lighting networks, and televisions. ## Package Contents: - 1 x Knox Krypton Eco 5000 Hybrid Solar Inverter - 1 x Integrated Anti-Dust Filter Kit (Pre-installed) - 1 x Wi-Fi Monitoring Module / Antenna - 1 x RS232 Communication Cable - 1 x User Manual and Wiring Guide - 1 x Mounting Bracket with Anchor Fasteners Designed with dual independent MPPT channels capable of accommodating 11,000W of total solar input (5,500W per tracker at up to 500VDC), the Argon 11000 extracts maximum yield from large multi-angle array layouts. When battery storage is unavailable or depleted, its battery-less operational mode runs loads seamlessly from available solar and AC grid power. ## Key Engineering Advantages - Split AC Dual-Load Output: Equipped with primary (11kW maximum) and secondary (5.5kW maximum) AC terminal blocks. The secondary port sheds high-draw appliances automatically during low solar or battery reserve conditions, protecting critical baseline circuits. - 160A Rapid Solar Charging Stage: Features a heavy-duty internal charger delivering up to 160A of DC current from solar panels and up to 120A from grid utility, dramatically shortening generator run-time and charge windows. - Dual 27A High-Current MPPT Trackers: Handles modern high-wattage monocrystalline solar panels with operating currents up to 27A per string without clipping midday peak generation. - Scalable Parallel Bus Architecture: Supports synchronized parallel connection of up to 6 inverters, scaling system capacity up to 66kW in single-phase or 400V three-phase configurations. ## Compatibility & Application The Argon 11000 interfaces with all standardized 48V battery architectures, featuring dedicated RS485 communication protocols for LiFePO4 lithium BMS integration and programmable voltage stages for lead-carbon, tubular, and AGM banks. Dual transfer-time settings (10ms for IT equipment and 20ms for appliances) ensure critical server racks and medical equipment maintain uninterrupted power during grid cuts. Removable dust filters shield internal power electronics against abrasive airborne contaminants. ## Package Contents - 1x Knox Argon 11000 Hybrid Solar Inverter - 1x Detachable Fine-Mesh Dust Cover - 1x External Wi-Fi Data Logger Module - 1x RS232 / Communication Cable Bundle - 1x Heavy-Duty Wall-Mount Bracket & Anchor Kit - 1x Operational Manual & Schematic Guide

Data Specifications