Loading product information...
ZENER: বাংলাদেশের সেরা সোলার ও ইলেকট্রনিক্স শপ | WhatsApp: +8801570281650
Loading product information...
-14% SaleDelivers 16kW continuous backup with 290A low-voltage charging, 3 MPPTs, and sub-4ms UPS transfer for whole-home uninterrupted power.
Overview & Engineering Purpose The Solis S6-EH1P16K03-NV-YD-L is a high-capacity single-phase low-voltage hybrid inverter engineered for whole-home backup, commercial workshops, and large residential estates. Operating on a standard 48V/51.2V DC battery bus, this unit eliminates the hazard and cost of high-voltage battery architecture while delivering a massive 16kW continuous AC output. It solves the chronic dilemma faced by property owners on single-phase utility drops who need to run heavy inductive loads—such as multiple inverter air conditioners, borehole submersible pumps, and refrigeration units—without overloading standard 5kW to 8kW residential inverters or tripping grid breakers during brownouts. Designed specifically to stabilize power in regions with erratic grid supplies, the inverter integrates dual backup ports for intelligent split-load shedding, automatic generator start/stop logic, and an ultra-fast sub-4ms transfer switch. Whether managing daily time-of-use tariffs, storing excess solar generation, or sustaining a microgrid during prolonged blackouts, the S6-EH1P16K03-NV-YD-L manages energy flow automatically across solar arrays, battery banks, generators, and the national grid. Key Engineering Advantages - High-Current Triple MPPT Architecture: Features 3 independent MPPT trackers with 6 string inputs capable of handling up to 40A per tracker (20A per string). This accommodates the latest 600W+ high-current bifacial solar panels without thermal clipping or string configuration bottlenecks. - 290A Low-Voltage Battery Interface: Delivers up to 290A of continuous charge and discharge current across 40V–60V battery banks. This enables rapid battery replenishment during short daylight windows and allows a standard 48V LiFePO4 bank to discharge 14kW+ directly to high-drain household appliances. - 200% Surge Withstand (32kW for 10s): Built with industrial-grade IGBT power stages capable of supplying twice its rated capacity (32kVA) for 10 seconds. This prevents inverter fault shutdowns caused by inductive inrush currents from compressors and motor starts. - Sub-4ms UPS-Grade Transfer: Employs an internal ultra-fast transfer switch that shifts from grid-tied to battery backup in less than 4 milliseconds, preventing desktop computer reboots, server crashes, or smart home automation resets. - IP66-Rated Monoblock Heat Management: Fully sealed against heavy rainfall, airborne dust, and high humidity, paired with intelligent redundant cooling fans that optimize heat dissipation under prolonged 45°C ambient temperatures. ## Compatibility & Application - Battery Storage: Fully compatible via CAN and RS485 communication protocols with leading 48V/51.2V LiFePO4 systems (Pylontech, Dyness, Felicity Solar, Solis IntelliHome) as well as conventional flooded and sealed AGM lead-acid banks. - Appliance Handling: Runs whole-house electrical setups simultaneously, including 4–5 units of 1.5-ton inverter air conditioners, 2HP deep-well pumps, induction cooktops, lighting circuits, and IT infrastructure. - Generator Integration: Accepts direct AC generator input with automated dry-contact starting and frequency-tracking algorithms that prevent generator stalling during step-load changes. - System Expansion: Supports parallel stacking of up to 6 units (up to 96kW on single-phase, or synchronized to form a balanced three-phase 400V microgrid).
Zener Authenticity Promise: All sitemarks, models, and technical statistics are registered with the factory and verified in our physical laboratory before sale.
Because this unit delivers 290A at 48V, never use undersized battery cables. Run dual parallel runs of 70mm² or single 120mm² copper flexible battery cables with an external 350A or 400A DC-rated fuse/MCCB within 1 meter of the battery terminals to prevent thermal bottlenecking and voltage drop.
Wire heavy inductive loads such as central water pumps and non-essential water heaters to the smart auxiliary load port rather than the primary backup port. This lets you program the inverter to cut high-drain appliances automatically when the battery drops below 40% State of Charge (SOC).
Mount the inverter vertically in a shaded, well-ventilated breezeway or utility room. Maintain at least 500mm lateral clearance and 800mm clearance from the floor. Direct tropical sunlight on the external heatsink will trigger thermal power derating above 45°C ambient temperatures.
Ensure your PV strings operate between 250V and 420V Vmp under peak midday cell temperatures. Keeping strings within this sweet spot maximizes the internal buck-boost converter's efficiency above 97% and avoids MPPT low-voltage clipping on sweltering days.
Yes, this inverter can operate in battery-free mode to power AC loads directly from solar generation while exporting surplus power to the grid. However, for backup functionality during a grid outage, an operational 48V battery bank is mandatory because the inverter cannot establish an off-grid AC microgrid on solar power alone without a storage buffer.
The inverter delivers up to 16,000 watts continuously, which can support four 1.5-ton inverter air conditioners, two household refrigerators, a 1.5HP submersible water pump, interior lighting, and home workstations simultaneously. It also features a 32,000VA (200%) surge rating for 10 seconds to handle the initial startup surge of large inductive motor loads without switching off.
Yes, it is compatible with both closed-loop smart BMS batteries via CAN/RS485 communication protocols and open-loop lead-acid or lithium batteries using manual voltage threshold settings. It includes pre-configured CAN bus firmware profiles for top brands including Pylontech, Dyness, Felicity Solar, and Solis battery packs.
Yes, the Solis S6 16kW inverter includes dedicated generator input terminals and programmable dry contacts for automatic generator start and stop. The internal software actively conditions generator power, prevents generator overloading by modulating battery charge rates, and automatically turns off the engine once batteries reach the target state of charge.
Yes, you can connect up to 6 units in parallel using dedicated communication link cables to achieve 96kW of continuous single-phase capacity. Additionally, multiple units can be synchronized across separate phase lines to construct a balanced 400V three-phase hybrid mini-grid for commercial or industrial facilities.
Only signed-in customers can write reviews. Your review will appear on your profile after moderation.
